Utility of a Low-Cost 3-D Printed Microscope for Evaluating Esophageal Biopsies.

In this manuscript we assessed the utility of a low-cost 3D printed microscope to evaluate esophageal biopsies. We conducted a comparative analysis between the traditional microscope and our 3-D printed microscope, utilizing a set of esophageal biopsy samples obtained from patients undergoing screening endoscopy. Two pathologists independently examined 30 esophageal biopsies by light microscopy and digital images obtained using a low-cost 3D printed microscope (Observer 1 and 2). The glass slide consensus diagnosis was compared to the findings of 2 additional pathologist who independently just reviewed the digital images (Observer 3 and 4). The intra-observer agreement was substantial to almost perfect for observer 1 (k:0.64) and 2 (k:0.84). All four observers had 100% sensitivity and negative predictive value, whereas specificity ranged from 59% to 100% and positive predictive value ranged from 21% to 100%. The PPV and specificity were lower for the two Observers (3 and 4) who just examined the digital images. Overall, our results suggest that telepathology may be used with high sensitivity and specificity, utilizing the pictures produced by our 3D-printed microscope.

Multi-modal microscopy imaging with the OpenFlexure Delta Stage.

Microscopes are vital pieces of equipment in much of biological research and medical diagnostics. However, access to a microscope can represent a bottleneck in research, especially in lower-income countries. 'Smart' computer controlled motorized microscopes, which can perform automated routines or acquire images in a range of modalities are even more expensive and inaccessible. Developing low-cost, open-source, smart microscopes enables more researchers to conceive and execute optimized or more complex experiments. Here we present the OpenFlexure Delta Stage, a 3D-printed microscope designed for researchers. Powered by the OpenFlexure software stack, it is capable of performing automated experiments. The design files and assembly instructions are freely available under an open licence. Its intuitive and modular design-along with detailed documentation-allows researchers to implement a variety of imaging modes with ease. The versatility of this microscope is demonstrated by imaging biological and non-biological samples (red blood cells with Plasmodium parasites and colloidal particles in brightfield, epi-fluorescence, darkfield, Rheinberg and differential phase contrast. We present the design strategy and choice of tools to develop devices accessible to researchers from lower-income countries, as well as the advantages of an open-source project in this context. This microscope, having been open-source since its conception, has already been built and tested by researchers around the world, promoting a community of expertise and an environment of reproducibility in science.

Fast, high-precision autofocus on a motorised microscope: Automating blood sample imaging on the OpenFlexure Microscope.

The OpenFlexure Microscope is a 3D-printed, low-cost microscope capable of automated image acquisition through the use of a motorised translation stage and a Raspberry Pi imaging system. This automation has applications in research and healthcare, including in supporting the diagnosis of malaria in low-resource settings. The plasmodium parasites that cause malaria require high magnification imaging, which has a shallow depth of field, necessitating the development of an accurate and precise autofocus procedure. We present methods of identifying the focal plane of the microscope, and procedures for reliably acquiring a stack of focused images on a system affected by backlash and drift. We also present and assess a method to verify the success of autofocus during the scan. The speed, reliability and precision of each method are evaluated, and the limitations discussed in terms of the end users' requirements.

Simplifying the OpenFlexure microscope software with the web of things.

We present the OpenFlexure Microscope software stack which provides computer control of our open source motorised microscope. Our diverse community of users needs both graphical and script-based interfaces. We split the control code into client and server applications interfaced via a web API conforming to the W3C Web of Things standard. A graphical interface is viewed either in a web browser or in our cross-platform Electron application, and gives basic interactive control including common operations such as Z stack acquisition and tiled scanning. Automated control is possible from Python and Matlab, or any language that supports HTTP requests. Network control makes the software stack more robust, allows multiple microscopes to be controlled by one computer, and facilitates sharing of equipment. Graphical and script-based clients can run simultaneously, making it easier to monitor ongoing experiments. We have included an extension mechanism to add functionality, for example controlling additional hardware components or adding automation routines. Using a Web of Things approach has resulted in a user-friendly and extremely versatile software control solution for the OpenFlexure Microscope, and we believe this approach could be generalized in the future to make automated experiments involving several instruments much easier to implement.

Robotic microscopy for everyone: the OpenFlexure microscope.

Optical microscopes are an essential tool for both the detection of disease in clinics, and for scientific analysis. However, in much of the world access to high-performance microscopy is limited by both the upfront cost and maintenance cost of the equipment. Here we present an open-source, 3D-printed, and fully-automated laboratory microscope, with motorised sample positioning and focus control. The microscope is highly customisable, with a number of options readily available including trans- and epi- illumination, polarisation contrast imaging, and epi-florescence imaging. The OpenFlexure microscope has been designed to enable low-volume manufacturing and maintenance by local personnel, vastly increasing accessibility. We have produced over 100 microscopes in Tanzania and Kenya for educational, scientific, and clinical applications, demonstrating that local manufacturing can be a viable alternative to international supply chains that can often be costly, slow, and unreliable.